5
OPERATOR OVERVIEW
CONTROL PANEL OVERVIEW
Control Panel is accessible under the cover on the rear of the operator.
4
Operator
4. Learn Button
5. Indicator LED
1. Up
2. Stop
3. Down
6. External Accessory Power (30V DC)
7. Terminal Blocks
Operator Mounting
Bracket
Hanging bracket
Power
cord
Rail
Header Bracket
Trolley
Chain
J-Bar
Door Connection Bracket
Door arm
Manual Release
1.
Up Button
Used for initial programming, driving the door
up and for displaying diagnostic codes - Digit 1
2.
Prog Button
Used to program door limits and other features
3.
Down Button
Used for initial programming, to drive the door
down and for displaying diagnostic codes -
Digit 2
4.
Learn Button
Used for programming remote access devices
and manual learning of forces
5.
Indicator LED
Used to indicate various programming modes
6.
External
Accessory
Power
30 Vdc 50mA available. Constant supply (no
low standby) unregulated.
7.
Terminal Blocks
Used to configure external accessories. See
chart below for the function of each terminal
block.
No.
Function
Colour
Polarity
Comment
0
E-Serial port
Green
+ve
Serial Communication Input
1
Trigger input
Red
+ve
Dry Contact input for access control accessories
2
Ground
White
-ve
Common terminal for access control accessories
2
Ground
White
-ve
Common terminal for Safety Beams
3
Safety Beam
Grey
+ve
Safety Beam Input: (compatible with supplied safety beams only)
4
Emergency Stop
Green
+ve
Dry Contact input for Emergency Stop N/C
5
Emergency Stop
Green
-ve
Common terminal for Emergency Stop
6
24Vdc power supply
Black
+ve
Accessory power output: (24 Vdc 150 mA) while door is in motion (regulated)
7
24Vdc power supply
White
-ve
Accessory power output: (24 Vdc 150 mA) while door is in motion (regulated)
Terminal Block Functions
INTRODUCTION
0
1
2
2
3
4
5
6
7
