Base Assy., Saw Holder
Slide, Saw Holder
Bar Protector
Double
T-Nut
Flat Head
Bolt 1"
Spring, Flat
Bumper
3 Places
5/16-18 x 1
Bolt
5/16-18 x 1/2
Bolt
PVC Cover
Lock Lever
GRIDIRON
GRIDIRON
GRIDIRON
GRIDIRON
TM
Custom Tool Storage
TM
CS-01 Chain Saw Holder
Instruction Manual
Thank you for purchasing this Gridiron product
Installation
1 Note: To mount the Chain Saw Holder to Gridiron posts, any
vertical wall, round trailer rail, or vertical framework, use the
CB-01 Chain Saw Holder Bracket.
2 The GRIDIRON Chain Saw Holder can be mounted to any
suitable horizontal surface or frame such as a trailer rail, pick-
up bed, or shelf.
3 Fasteners are assembled at the factory but can loosen during
shipping. Assemble any loose bolts, washers, and T-nuts only
as shown (NOTE- INCORRECT ASSEMBLY WILL RESULT
IN DAMAGE.)
4 Mount the Chain Saw holder using two 5/16-18 x 1 Flat Head
Bolts.
5 Loosen the Bar Protector and place your saw in the holder as
shown. The Bar Protector may be reversed or mounted on
the outside of the frame to accomodate most chain saws.
Once the saw is sitting square and flat on the frame, tighten
the Bar Protector in place.
Part List
Qty
Description
Part
No.
1
Base Assy.
102328
1
Slide,Saw Holder
102311
1
Lock Lever
102258
1
Spring, Flat
102257
1
Bar Protector
102314
3
Bumper
102044
1
PVC Cover
102326
1
Double T-nut
102146
2
5/16-18 x 1” Bolt
2
5/16-18 x 1” FH Bolt
2
5/16-18 Nut
1
5/16-18 x 1/2” Bolt
4
5/16” Flat Washer
3
5/16” Lock washer
Package Contents
