GREMSY PIXY SM, Руководство пользователя

Страница: 37 / 54

GIMBAL 37
U S E R M A N U A L
FILTER
The purpose of the filters is to eliminate noise and vibration due to structural
resonances in the camera, lens, or gimbal.
Setting the filters too high or too low can cause signal disturbances that can
reduce the overall stabilization.
Defines the strength of the filter applied to Gyro sensor output. If the gimbal has
oscillations that cannot be corrected by adjusting stiffness settings, the Gyro
Filter is used to further tune the gimbal and remove the oscillation.
Defines the strength of the filter applied to motor output. If the gimbal has
oscillations that cannot be corrected by adjusting stiffness settings, the Output
Filter is used to further tune the gimbal and remove the oscillation.
Vibration . If the gimbal is vibrating at a high frequency after tuning, increase the
filter values.
Oscillation or rocking . If the gimbal is oscillating or rocking at a low frequency
after tuning, decrease the filter values.
GYPRO FILTER
OUTPUT FILTER
GYRO FILTER Gyro Filter
Output Filter
2
3