GREMSY GPORT, Руководство пользователя

Страница: 30 / 33

-30-
Oscillation or rocking
If the gimbal is oscillating or rocking at a low frequency after tuning, decrease the filter
values.
Default Values
Gyro Filter
2
Output Filter 3
Upgrading Firmware
NOTE:

Only USB connection allows upgrading firmware.

Make sure Silab USB driver is already installed. The driver can be found at HERE
How to Upgrade

Mount gimbal to the aircraft with gPort.

Power on the aircraft

Connect USB cable from gPort to Mac/PC.

Run the gTune Desktop Software

In the software, select “Serial” option on “CONNECTION” tab

Select the port in the list

Click on the “CONNECT” button

“Browse” to firmware file for your gimbal from your computer
o
NOTE: Firmware version must be v7.5.7 or above HERE

Click “Upgrade” button. The process will take about 2 minutes. When the firmware is
upgraded successfully, the gimbal will be restarted automatically.