H68.0.02.6C-04
Operating Manual GMK 210
page 4 of 20
_____________________________________________________
_____________________________________________________________________________
2.2 Safety guidelines
This device has been designed and tested in accordance with the safety regulations for electronic
devices. However, its trouble-free operation and reliability cannot be guaranteed unless the
standard safety measures and special safety advises given in this manual will be adhered to when
using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not
subjected to any other climatic conditions than those stated under "Specification".
If the device is transported from a cold to a warm environment condensation may cause in a
failure of the function. In such a case make sure the device temperature has adjusted to the
ambient temperature before trying a new start-up.
2.
If there is a risk whatsoever involved in running it, the device has to be switched off
immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device
- the device is not working as specified
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
3. When connecting the device to other devices the connection has to be designed most
thoroughly as internal connections in third-party devices (e.g. connection GND with protective
earth) may lead to undesired voltage potentials that can lead to malfunctions or destroying of the
device and the connected devices.
This device must not be run with a defective or damages power supply unit.
Danger to life due to electrical shock!
4.
Do not use these products as safety or emergency stop devices or in any other
application where failure of the product could result in personal injury or material
damage.
Failure to comply with these instructions could result in death or serious injury and
material damage.
5.
This device must not be used at potentially explosive areas! The usage of this
device at potentially explosive areas increases danger of deflagration, explosion or
fire due to sparking.
3
Product Description
3.1 Scope of supply
The scope of supply includes:
GMK 210
9V - battery
Operating manual
Short manual
3.2 Operation and maintenance advice
If „bAt‟ is shown in the lower display the battery has been used up and needs to be replaced.
However, the device will operate correctly for a certain time.
The battery has to be taken out, when storing device above 50°C.
We recommend taking out battery if device is not used for a longer period of time.
