background image

 

 

1 | About this documentation 

G 1910-02 

4 / 30 

B-H90.0.01.DB2-2.1 

About this documentation 

1.1 

Foreword 

Read this document carefully and familiarise yourself with the operation of the product 
before you use it. Keep this document ready to hand and in the immediate vicinity of 
the product so that it is available to the personnel/user for reference at all times in 
case of doubt. 

The product was developed according to the state of the art and fulfils the require-
ments of the applicable European and national Directives. All corresponding docu-
ments are available from the manufacturer. 

Only technically qualified persons are permitted to carry out commissioning, operation, 
maintenance and decommissioning. The qualified personnel must have carefully read 
and understood the operating manual before beginning any work. 

1.2 

Purpose of the document 

  It provides important information for operating safely and efficiently with the prod-

uct.

 

  In addition to the quick reference guide with all relevant legal and safety content in 

hard copy, this document is a detailed reference option for the product.

 

1.3 

Legal notices 

The liability and warranty of the manufacturer for damages and consequential dam-
ages are voided with misuse, disregarding this document, disregarding safety notices, 
assignment of inadequately qualified technical personnel and arbitrary modifications of 
the product. 

Only carry out the maintenance and service tasks on this product that are described in 
this documentation. In the process, adhere to the specified steps. For your own safety, 
only use original spare parts and accessories of the manufacturer. We assume no lia-
bility for the use of other products and resulting damage. 

This document is entrusted to the recipient for personal use only. Any impermissible 
transfer, duplication, translation into other languages or excerpts from this operating 
manual are prohibited. 

The manufacturer assumes no liability for print errors. 

1.4 

Correctness of content 

The contents of this document were checked for corrected and are subject to a contin-
uous correction and updating process. This does not rule out potential errors. In the 
event that errors are discovered or in case of suggestions for improvement, please 
inform us immediately via the indicated contact information in order to help us make 
this document even more user-friendly. 

1.5 

Layout of this document 

Description 

Each chapter is explained at the beginning in the description. 

Содержание G 1910-02































Отзывы: