20 / 30
B-H90.0.01.DB2-2.1
7 | Operation and maintenance
G 1910-02
–
In order to protect the batteries, the charging process is not started when the
charge cable is plugged in, if fully charged batteries are detected based on the
voltage monitor.
7.2.3
Rechargeable battery replacement
DANGER
Danger of explosion!
Using damaged or unsuitable rechargeable batteries can generate heat, which can
cause the rechargeable batteries to crack and possibly explode!
– Only use high-quality and suitable NiMH rechargeable batteries!
CAUTION
Damage!
If the rechargeable batteries have different charge levels, leaks and thus damage to
the product can occur.
– Use new, high-quality rechargeable batteries!
– Do not use different types of rechargeable batteries!
– Remove depleted rechargeable batteries and dispose of them at a suitable collec-
tion point!
NOTE
Read the following handling instructions before replacing rechargeable batteries and
follow them step by step. If disregarded, the product could be damaged or the protec-
tion from moisture could be diminished.
Proceed as follows to replace the rechargeable batteries.
–
The product is switched off.
Fig. 1: Batteriewechsel
1.
Unscrews the Phillips screws (A)and
remove the cover.
2.
Carefully replace the two Mignon AA
batteries (B). Ensure that the polarity
is correct! It must be possible to insert
the batteries in the correct position
without using force.
3.
The O-ring (C) must be undamaged,
clean and positioned at the intended
depth. In order to facilitate assembly
and avoid damage, a suitable grease
can be applied.
4.
Fit the cover on evenly. The O-ring
must remain at the intended depth!
5.
Tighten the Phillips screws (A).
The product is now ready for use again.
Description
Prerequisites
Instruction
Outcome of an action
