GREER Company MicroGuard RCI 514, Руководство оператора

Страница: 6 / 30

6
THE PICTOGRAPH
1. The PICTOGRAPH gives a pictorial representation of the current set up of the system with
LEDs. Most of these LED’s are operated through the menu driven “Crane Setup” button
2. The 2 shaded areas (picking point and winch selection) contain a group of one or more
LEDs and a button which is pressed to change the setup selection. In groups where there
are multiple options, LEDs illuminate one at a time after the selection is made.
3. The OUTRIGGER group contains three LEDs. They indicate the selection of either full
outriggers, intermediate or retracted outriggers.
4. The TIRE group contains one LED. When operation on tires is selected, the outrigger LED
will turn off, and the tire LED will illuminate.
5. The COUNTERWEIGHT group contains one LED. It is only active on machines that have
counterweight options.
6. The WINCH group contains two LEDs. They indicate the selection of FRONT or REAR
winch.
7. The STOWED JIB group contains one LED. This will illuminate when the jib is stowed on the
boom.
8. The MANUAL SECTION group contains one LED. It is active on machines that have pinned
extensions or active tip boom options.
9. The JIB group contains 6 LEDs. They indicate the length and offset of the jib in use.
10. The AUX HEAD group contains one LED that will illuminate when the AUX HEAD is fitted.
11. The POINT OF LIFT group contains three LEDs. A single LED will illuminate to show the
point of lift.