GREER Company MicroGuard RCI 514, Руководство оператора

Страница: 11 / 30

11
SYSTEM SETUP
NOTE: The operator may adjust the following settings at any time from the main screen.
1.
Parts of Line
- Set the PARTS OF LINE for the currently selected winch by pressing the UP
or DOWN arrow as appropriate.
a. When another winch is selected it may be necessary to reset the parts of line for the
other winch.
b. When the number of parts of line on the machine is changed it will be necessary to
reset the parts of line on the display.
2.
Picking Points
- Before choosing the point of lift, ensure the correct winch has been
selected.
a. Always check the point of lift selection following selection of the winch.
b. Adjust Pick Points in relation to where the load is being picked from (Main Boom,
Auxiliary Head, or Jib).
c. Adjust this by pressing the Load Pick Points” button. Each time the button is
pressed, the selection will go to the next available pick point.
3.
Winch Selection
- You may select the front or rear Winch by pressing the button adjacent
to the winch.