GREER Company Crane Systems BA 1510, Руководство оператора

Страница: 6 / 12

GREER COMPANY
Crane Systems
THE
ALAR
MS
PRE-ALARMS
The horn beeps at 90% of the working range of the boom angle IF the display
identifies TWO angle limits. IF only ONE angle limit is identified, the pre-alarm
activates 5° BEFORE that limit. Between the pre-alarm point and the alarm point,
the limit name flashes "!!!" and the yellow lamp lights.
ALARMS
At and beyond a limit, the horn sounds, both the red and yellow lamps light up,
and a warning message appears. Motion cuts (if installed) will activate.
OPTIONS WHEN AN ALARM ACTIVATES:

MOVE OUT OF THE ALARM CONDITION

PRESS CANCEL ALARM TO SILENCE THE HORN AND
DEACTIVATE THE RED LAMP.

PRESS CANCEL ALARM AND HOLD THE KEY DOWN UNTIL THE
HORN BEEPS. " ALARMS INHIBITED " WILL APPEAR ON THE
DISPLAY AND ALL MOTION CUTS WILL BE OVERRIDDEN.

PRESS CANCEL ALARM THREE TIMES TO RETURN THE METER
TO THE FULL ALARM CONDITION.
NOTE: ANY NEW ALARM, EVEN DURING ALARMS INHIBITED, WILL
CAUSE THE METER TO RETURN TO THE FULL ALARM CONDITION.