GreenWorks STF312 Скачать руководство пользователя страница 3

1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.

1.2

OVERVIEW

Figure 1 - 19.

1

Rear handle

2

Lock-out button

3

Speed switch

4

Trigger

5

Auxiliary handle

6

Coupler

7

Edge guide

8

Cut-off blade

9

Guard

10

Screw hole

11

Release button

12

Lower shaft

13

Upper shaft

14

Positioning hole

15

Knob

16

Lower clamp

17

Battery release button

18

Spool cover

19

Spool

20

Tab

21

Line exit hole

22

Bump knob

23

Spool housing

24

Metal rod

A

Direction of rotation

B

Best cutting area

C

Dangerous cutting area

2

INTRODUCTION

Your product has been engineered and manufactured to high
standards for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of
rugged, trouble-free performance.

2.1

INTENDED USE

This product is only intended for use outdoors.

This product is designed for cutting grass, light weeds, and
other similar vegetation at or about ground level. The cutting
plane should be approximately parallel to the ground surface.

The product should not be used to cut or trim hedges, bushes
or other vegetation where the cutting plane is not parallel to
the ground surface.

3

GENERAL POWER TOOL

SAFETY WARNINGS

 

WARNING

Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your battery-
operated (cordless) power tool.

3.1 TRAINING

• Read the instructions carefully.

Be familiar with the controls
and the correct use of the
machine.

• Never allow children, persons

with reduced physical, sensory
or mental capabilities or lack
of experience and knowledge
or people unfamiliar with these
instructions to use the
machine. Local regulations can
restrict the age of the operator.

• Keep in mind that the operator

or user is responsible for
accidents or hazards occurring
to other people or their
property.

2

English

EN

Содержание STF312












Отзывы: