6.2
INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
6.3
REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
7
OPERATION
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
7.1
START THE MACHINE
1. Push the on/off button.
7.2
STOP THE MACHINE
1. Release the on/off buttton.
7.3
ADJUST THE ANGLE
1. Turn the top head of the mahicne to adjust the light angle
(0-135°).
8
MAINTENANCE
WARNING
Remove the battery pack from the machine before
maintenance.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
8.1
CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a
moist and soft cloth.
9
TECHNICAL DATA
Voltage
24 V
Lumens
220 lm
Run time (2 Ah)
Up to 20 hours
Rotation angle
135°
Weight without battery
0.60 lbs ( 0.27 kg)
Battery model
LB24A020
/
LB24A040
Charger model
CAG801 and other CAG series
The recommended ambient temperature range:
7
English
EN
