•
Park the mower on level ground. Make sure that steering
control levers are in the neutral position, and that the deck
blade switch is in “OFF” position. Raise deck, rotate key
to “OFF” position, remove key from switch and
disconnect battery cables by pulling inward on RED
battery quick disconnect handle in battery box
compartment.
•
Any maintenance operation that requires the removal of
safety covers must be performed by a trained service
technician.
•
Before working on or under the deck, make certain
master power ignition switch is “OFF” and key is
removed and deck blade switch cannot be accidentally
started and disconnect battery cables by pulling inward on
RED battery quick disconnect handle in battery box
compartment.
•
Use a stick or similar instrument to clean under the
mower, making sure that no part of the body -- especially
arms and hands -- is under mower.
•
Keep your machine clean and remove any deposits of
trash and clippings. These can cause fires and
overheating. Allow machine to cool before storing.
•
Prevent fires by keeping battery compartment, deck and
operator’s station clean of accumulated trash, grass
clippings, and other debris.
•
Clean battery compartment, drive motor compartment,
mower deck, seat, etc., of all dirt and debris. To clean, use
only compressed air. DO NOT use water, solvents, hard
cleaners or abrasives.
•
Always wear adequate eye protection when servicing the
batteries or when grinding mower blades and removing
accumulated debris. Never attempt to make any
adjustments or repairs to the mower’s drive system,
mower deck or any attachment while the traction drive
system is running. Repairs or maintenance requiring
power should be performed by trained maintenance
personnel only.
•
Never work under the machine or attachment unless it is
safely supported with jack stands. Make certain machine
is secure when it is raised and placed on the jack stands.
•
The jack stands should not allow the machine to move
when the traction drive system is running and the drive
wheels are rotating. Use only certified jack stands. Use
only appropriate jack stands, with a minimum weight
rating of 2000 pounds (907.2 kg) to block the unit up.
Use in pairs only. Follow the instructions supplied with
the vehicle stands.
•
Do not touch hot parts of machine.
•
Keep nuts and bolts tight, especially the blade attachment
bolts. Keep equipment in good working condition.
•
Never tamper with safety devices. Check their proper
operation regularly.
•
Turn the key to the “OFF” position before unclogging the
discharge chute.
•
Never clear the discharge chute with the machine
running. Turn the key to the “OFF” position and be sure
the blades have stopped before cleaning. Use a stick to
clear a plugged discharge area. Never use your hand!
•
Stop unit and allow blades to stop before unclogging
chute. Grass collection system components are subject to
wear, damage and deterioration, which could expose
moving parts or allow objects to be thrown. Frequently
check components and replace with manufacturer’s
recommended parts, when necessary.
•
Exercise caution when working under the deck as the
mower blades are extremely sharp. Wear gloves and use
extra caution when servicing them.
•
Use only genuine Greenworks Commercial Mower parts
to ensure that original standards are maintained.
•
Always disconnect batteries when transporting unit. Keep
unit free of grass clippings, leaves and other debris.
13
CLEANING AND STORAGE
13.1 CLEAN THE MACHINE
•
Remove any build-up of grass and leaves on or around
the motor cover (do not use water).
•
Occasionally wipe the mower clean with a dry cloth.
•
If debris builds up on the underside of the mower during
use, stop the motor, turn off the machine, and scrape it
clean using an appropriate tool.
13.2 STORE THE MACHINE
The following steps should be taken in order to prepare the
machine for storage.
•
Clean the machine as described in the previous section.
•
Inspect the blade and replace it or sharpen it, if required
(refer to the Maintenance section).
•
Do not store the machine next to corrosive materials, such
as fertilizer or rock salt.
•
Keep the machine out of the reach of children.
•
Do not cover the machine with a solid plastic sheet.
Plastic coverings trap moisture around the machine,
which causes rust and corrosion.
•
Check thoroughly for any worn or damaged parts that
need replacing and order them from your dealer.
•
Thoroughly lubricate machine, according to lubrication
instructions.
•
Fully charge and service the batteries.
•
Do not deflate tires.
•
The machine should be stored in a well-ventilated, clean
and dry place as the battery charger cannot be used in a
wet environment.
•
Always keep the batteries fully charged. It is
especially important to prevent battery damage when
the temperature is below 32°F (0°C).
•
Attach the charger adapter to the charging port and
the batteries per the Charging Adapter section in the
Electrical System section.
•
Plug the charger into a proper electrical outlet. Refer
to Battery Charger, Battery Charging and Charging
Recommendations portions of the Electrical System
33
English
EN
P0802464-00 v1.2