05-C2078 K IB~GREENTEK~E2169U3610N~A Inside Size:220LX150W mm Designer:HUA Created Date:2019.12.4
TV Antenna
Specialist
Installation Manual
Model: E2169U3610N
Attic & Outdoor Antennas
TECHNICAL SPECIFICATIONS
SPECIAL FEATURES
Installation Manual
Frequency:
UHF 470~790 MHz
Polarization:
Horizontal
F/B:
25 dB
VSWR:
UHF:
<
2.5
3dB Beam Width:
UHF±38º
Impedance (Ω):
75
Suggest reception range:
0-100 KM from TV transmitters
Passive Version
Highlights
Specially designed for reception of UHF signals
Professional structural design and materials make the antenna
more solid and easier to install
Strong and durable elements are anti-rust, waterproof and
weather resistant
Performance
Receives Full HD and digital TV signals, local UHF
signals
Reflector panels provide excellent resistance to
interference
F type connection makes signal transmission more
effective
1.
2.
Assembling the antenna boom
Installation of the radiator box
element list
Main antenna
antenna reflector
18 square convex clip
vibrator
M6 wing Nut
M5 screws
M5 wing nut
M4 wing nut
M4 screws
U-Bolt
square convex clip
reflector clips
18 square nine teeth clamp
Open the folding part of the antenna and secure it using the supplied screws – as shown below.
Attach and screw to the boom of the antenna the radiator box using the supplied wing nut – as shown
below.
5.
6.
Installation of a waterproof cap and F connector
on the coaxial cable
Connecting the coaxial cable
a) Cut the end of the enclosed rubber cap as shown in the picture.
b) Pull the coaxial cable through the cap.
c) Install F connector to the coaxial cable – as shown below.
Connect the coaxial cable to the radiator box on the antenna. Then pull the waterproof cap over the
connection.
Attach the cable to the antenna using a cable bracket – as shown below.
4.
Installation of the antenna on the mast
Attach the bracket to the mast and firmly screw in _as shown below.
Digital TV
Not Digital TV
Digital Terrestrial STB
Digital TV Antenna
Digital TV Antenna
3.
Folding Reflector installation.
Open the Folding Reflector grids, and link them up. Just
one-off!
Then insert into the bracket and fasten them to the boom
of the antenna using the supplied screws – as shown
below.
Všetky práva vyhradené. © 2019 Alza.cz
