Barrier Mower RI 60-80
28
Oil supply
•
Daily before starting up check oil level in tank reservoir.
•
It is a good practice to constantly keep an eye on the tank level gauge as a pipe
burst could empty the tank within minutes.
•
A pump or motor starved of oil will be damaged beyond repair.
•
Replace oil if signs of contamination occur (discolored)
Contamination can be reduced by:
•
Thoroughly cleaning around reservoir cap before removing.
•
Using a clean container when replenishing the system.
•
Regularly servicing the filtration system.
•
Never allowing oil level to
fall below the sight gauge.
Daily inspect all hydraulic connections and fittings to be in good order. Any damage
or leaks must be rectified immediately; this is part of the daily maintenance and is your
responsibility, to maintain a long reliable working life.
When tightening fittings always use two spanners when necessary and do not over
tighten. If a fitting leaks it will need to be replaced.
MODEL
OIL QUANTITY IN L/MIN.
RI 60 & 80
25 / 40 Liter/ 150 bar
MAINTENANCE DIAGRAM
Maintenance intervals
Operation
Before a working session
Blades inspection
Inspection of oil level in hydraulic
system tank
Every 8 working hours
Inter-row mower cleaning
Lubrication