GreenTec HX 170, Руководство пользователя

Страница: 19 / 27

Cutterbar HX 170-230-270
19
Maintenance
Service Check / Re-tightening

Re-tighten everything after 2 hours of operation. Pay special attention to
hydraulics and cutting edges.

Re-tighten everything after 10 hours of operation.

Re-tighten / check all bolts every 8 hours.

Dismount the hydraulic system protective cover and remove twigs and dirt from
the housing.

Following service, remount all shields, guards and protective plates.

Check the spring stop bolt tension. Adjust to 52 mm. See Illustration 2.
Illustration 2.
Lubrication
Lubricate the machine every 8 operating hours. Use more lubrication when working in
a particularly demanding environment.
Following cleaning:
Lubricate all machine parts and auxiliary equipment each time the machine has been
cleaned.
Hydraulic Hoses
Carefully check the condition of all hoses regularly. Ensure that hoses are not rubbing
against machine edges, bolts or similar.
Check the condition of all hydraulic hoses and fittings daily. Immediately correct any
and all damaged or leaking parts. This is part of the daily maintenance routine and it is
your responsibility to ensure that the machine will have a long service life.
Replace hoses with broken metal bands.
The hydraulic system uses a very high pressure. Always use original hoses. Ruptured
hoses may be lethal.