GreenTec 9990060L-25, Руководство пользователя

Страница: 53 / 66

BAR
R
IER
MOWER R
I 6
0
–
80
45
5.4.8 START-UP AFTER UNINTENDED / ACCIDENTAL STOPPAGE OF OPERATION (q)
In the event of an accidental stoppage of the multi carrier and/or attachment
tool, always follow the instructions given in the machine's instruction manuals.
(Both multi carrier and attachment tool!)
An unintended stoppage of operation can occur at any time. There can be various reasons, but often
downtime can be avoided if the operator uses and maintains the machine correctly and avoids hitting:
Larger stone
Tree stumps
Fence wire
Manhole covers
Litter/garbage
Plastic and other packaging
Bicycles/scrap
If the attachment tool hits any of the above objects, strong vibrations will typically occur.
In the event of signs of strong vibration in connection with the above, or in the event of e.g. leakage, lost
and/or loose parts on the machine, the operator should do the following:
1. Stop the machinery immediately.
2. Tilt the attachment tool around and lower to a height so that the machine's elements can be
inspected.
3. Apply the handbrake, switch off the vehicle, remove the key and make sure that the machinery has
come to a complete stop.
4. Attachment tools and multi carrier are inspected and checked:
o
If foreign bodies are found, these are released manually. (Fence wire, plastic etc.)
o
Check machine parts for cracks, breaks, missing parts, or damage.
o
Do not drive until all damage has been repaired.
Follow the recommendations below in connection with starting up after a shutdown:
•
Be sure that the entire machine is inspected and in working order.
•
Start the attachment tool slowly. (See the instruction manual for the
attachment tool in use)
•
Pay particular attention that both the multi carrier and attachment tool work
according to all the guidelines stated in their instruction manuals.