93-603 Multimeter
5
• Disconnect the test leads and turn the range selector to OFF before
removing the back of the case to replace the fuse or battery.
• Disconnect the test leads from the component or circuit under test
before changing the position of the range selector.
• Use only properly rated fuses when replacement is necessary.
See the Specifications section of this manual.
• Do not perform any service or maintenance other than as described
in this manual.
• Replace weak or discharged batteries as soon as either of these
conditions is detected.
• Do not expose meter to extremes in temperature or high humidity.
See Specifications section of this manual.
Failure to observe these precautions may result in injury and damage
to this instrument.
SAFETY INFORMATION (cont’d)
