Propagation Instructions for Cuttings
1. If using gel type rooting hormone, dip the cutting
first. Slide the cutting into the sponge disc using the
slit to avoid damaging the cutting. At least 2cm of
the stem should show below the sponge.
2. Place the sponge disc on top of the lip of the
support tray.
3. Put the propagator lid in place. Switch on the
sprinkler and run continuously.
When roots are visible top up the tank (if necessary)
with water and add nutrients (3ml of A nutrient
followed by 3ml of nutrient B for every 1 litre of water
in the tank).
The nutrient dilution rate is based on Greenhouse Sensation™ nutrients. Should you
wish to use any other brand of hydro nutrient you may need to seek advice from the
supplier or retailer.
