1
Battery compartment &
2
Battery compartment cover
Slide out the battery compartment
1
, and insert
2x (LR03/AAA) 1.5V alkaline batteries.
WARNING
A. Use only fresh alkaline batteries at the beginning
of the season.
DO NOT use rechargeable batteries.
B. Test the unit by turning the Run Time knob to ON
position. You should hear the sound of the motor
within 10 seconds. If you do not hear the sound,
check if the batteries are installed correctly.
C. Turn Run Time to OFF position before connecting
to tap.
3
3/4" Tap adaptor and
4
Collar ring.
Turn the collar ring loose
4
until the tap adaptor
3
is
unlocked, screw the tap adaptor
3
on to the tap tight
and then lock them tight with the collar ring
4
.
WARNING
DO NOT use spanners or pliers to avoid damage
to the timer.
Water Timer
Instructions
Model Number: P00GS48A
Timer Features
⑦
⑤
③
⑩
④
⑨
⑧
②
①
⑥
5
Frequency knob
Determine how often you will water, from 1 hour to 1 week.
6
Run Time knob
Choose how long to water, from 1 minute to 120 minutes.
7
Male snap-on connector
Connect hose attachment to the male snap-on connector
7
at the bottom of the timer.
8
Delay button
To delay the start watering time press Delay button for
more than 3 seconds until led is constantly
ON, then
each press of delay button means 1 hour delay of the
next start watering time (
EXAMPLE 3).
9
Led indicator
Led indicator flashes once every 4 seconds.
WARNING
Replace with new batteries if led indicator flashes quickly
or continually on.
10
Filter
Filter traps dirt particles and prolong life of timer.
WARNING
Clean filter regularly and replace if worn.
PROGRAM TIMER
1. Set Frequency (determine how often you will water,
from 1 hour to 1 week.)
2. Set Run Time (determine how long to water,
from 1 minute to 120 minutes.)
NOTE: The first watering will start X hours later, X is the
set frequency hours.
WARNING
Frequency should always be longer than Run Time.
(Example: Frequency=1H, Run Time=90 minutes,
is NOT a valid setting.)
