Greenheck H-G 060 Скачать руководство пользователя страница 12

Страница: 12 / 12

Model H-G/H-GB Centrifugal Roof Exhaust Fan

Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from

the purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option

when returned to our factory, transportation prepaid. Motors are warranted by the motor manufacturer for a period of

one year. Should motors furnished by Greenheck prove defective during this period, they should be returned to the

nearest authorized motor service station. Greenheck will not be responsible for any removal or installation costs.

As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications

without notice.

Greenheck Catalog H-G H-GB provides additional information describing the

equipment, fan performance, available accessories and specification data.

Contact Greenheck Fan Corporation:

Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com

471559 IOM H-G/H-GB Rev. 1 March 2008

Warranty

AMCA Publication 410-96, Safety Practices for Users and Installers of Industrial

and Commercial Fans, provides additioinal safety information. This publication

can be obtained from AMCA International, Inc. at: www.amca.org.

Содержание H-G 060












