Greenface Labs THE SPANKULATOR, Руководство пользователя

Страница: 10 / 22

UP
Up Spanks send a sequence of pulses that increase in width to Trig Out.
The voltage level at CV Out is proportional to the current pulse width plus or minus a value that
is calculated from the Randomness parameter. The voltage will be at the minimum (-5V) when
the Spank starts and will increase to the maximum (+5V) when the Spank completes. This
range can be reduced by using the CV Scale control.
Parameter Min Max Default
End Pulse Len 10 9999 100
Start Pulse Len 10 9999 10
Num Pulses 2 99 10
Randomness 0 99 0
Initial Delay 0 9999 100
The figure below illustrates an Up Spank with the default settings. The yellow trace is Trig Out
and the purple trace is CV Out.
Figure 2 - Default Up Spank