
Questions
?
Email [email protected] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL PINE RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
MODEL #
RCP4C4
DIMENSIONS
4ft. wide x 4ft. long
x 7in. high
PACKAGE CO
(4) Screws
x4
x4
8in. x 2.5in. x 2.5in.
Short Posts
4ft. x 3.5in.
Boards
3.5in. x 3.5in.
Decorative Caps
x8
1.
BUILD A WALL
Hold a Board on the ground so it's standing on edge with the
notched ends to the left and right. Slide a Short Post down over one
notched end of the Board. Next, slide another Short Post over the
other notched end. This forms a wall.
Repeat step one to complete a second wall.
2.
BUILD A FRAME
Place the walls parallel to each other and connect them into a square
with two more Boards. This forms the frame of the Garden Bed.
3.
FINISH GARDEN BED & ATTACH DECORATIVE CAPS
Add one more Board, one at a time, directly on top of each
existing Board in the frame. Push the Boards down evenly
between the tops of the Short Posts. If needed, tap snugly into
place with a rubber mallet. Attach each Decorative Cap to a
Short Post with a screwdriver and one Screw. We recommend
drilling a pilot hole first for each Screw.
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M–F 8–5
INSTALLATION SUPPORT
youtube.com/greenesfence
TO STACK GARDEN BEDS FOR MORE HEIGHT:
•
Assemble the first Garden Bed without Decorative Caps, or remove Caps
from a completed Bed.
•
The Corner Posts are designed to be taller than the Boards, so Beds can
be stacked securely.
•
Slide a Board from the second Garden Bed into tops of the Corner Posts from
the first Bed, to extend one wall upwards.
•
Slide Corner Posts from the second Bed down on both ends of the Board to lock in place.
•
Continue assembling the second Bed, sliding Boards and Posts into place on top
of the first to complete another rectangle.
•
Attach Decorative Caps to the tops of each Corner Post.