Questions
?
Email [email protected] or call 800-622-5510 Monday - Friday 8am-5pm EST
PREMIUM CEDAR RAISED GARDEN BED WITH TRELLIS
ASSEMBLY INSTRUCTIONS
MODEL #
RC489612PTRE
DIMENSIONS
4ft. wide x 8ft. long
x 11in. high
PACKAGE CO
(6) Screws
1.
BUILD THE TRELLIS WALL
Hold a Board on the ground so it’s standing on edge with the notched
ends to the left and right. Slide a Trellis Post down over one notched end
of the Board. Next, slide another Trellis Post over the other notched end.
This forms the Trellis wall.
2.
BUILD TWO SHORT WALLS
Repeat Step One using Tall Posts to complete two more walls.
3.
BUILD A FRAME WITH TRELLIS ON ONE SIDE
Place the Trellis wall and one short wall parallel to each other and
connect them into a square with two more Boards. This forms the
frame of a 4ft. x 4ft. Garden Bed with Trellis on one side.
4.
DECIDE WHERE YOU WANT THE TRELLIS AND BUILD
THE SECOND FRAME
The Trellis can go on either end of the Garden Bed, or in the center,
depending on where you attach the second 4ft. x 4ft. frame. Once
you decide, place the other short wall from Step Two parallel to the
correct wall and connect them into a square with two more Boards,
completing a 4ft. x 8ft. rectangle.
5.
FINISH GARDEN BED WALLS
Add one more Board, one at a time, directly on top of each existing
Board in the frame. Push the Boards down evenly between the tops
of the Posts. If needed, tap snugly into place with a rubber mallet.
6.
BUILD THE TRELLIS
Slide one Spacer into the top of each Trellis Post, then add one Slat on top
of the Spacers and push them down directly on top of the existing wall.
Repeat Step Six using all the Spacers and Slats to complete the Trellis.
12in. x 2.5in.
x 2.5in.
Tall Posts
x4
4ft. x 5.5in.
Boards
3.5in. x 3.5in.
Decorative Caps
x2
x14
x10
x20
x6
46.5in. x 2.5in.
x 2.5in.
Trellis Posts
4ft. x 1.25in.
Trellis Slats
Trellis
Spacers