PACKAGE CO
(16) Screws
2.
BUILD A FRAME.
Place the walls parallel to each other and connect them
into a square with two more Boards. This forms the Frame
of the Garden Bed.
4.
CONNECT THE WALL FROM STEP 3 TO ONE SIDE
OF THE COMPLETED FRAME
Extend two Boards parallel to each other from the Short Posts on one
side of the completed Frame, and connect the wall from Step 3 over
the other ends to complete a second frame.
3.
BUILD A WALL WITH TALL POSTS.
Questions
?
Email [email protected] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL CEDAR RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
x8
Decorative
Caps
x31
x2
1.
BUILD A WALL WITH SHORT POSTS.
Hold a Board on the ground so it's standing on edge with the notched
ends to the left and right. Slide a Short Post down over one notched
end of the Board. Next, slide another Short Post over the other
notched end. This forms a wall.
Repeat this step to complete a second wall.
*
See back for next steps
x10
4ft. x 3.5 in.
Boards
8in. x 2.5in. x 2.5in.
Short Posts
11in. x 2.5in. x 2.5in.
Tall Posts
MODEL #
RC2T10S31B
DIMENSIONS
4ft. wide x 12ft. long
x 7in.- 10.5 in.-14in. high
Short Posts
Tall Posts
2 Stacked
Short Posts
Configurations
:
Short Posts
Tall Posts
2 Stacked
Short Posts
5.
COMPLETE THE THIRD FRAME.
Connect two Boards to one side of the second Frame and add two
more Short Posts and a Board to finish the final Frame.
6.
ADD A SECOND BOARD TO ALL WALLS.
Add Boards, one at a time, directly on top of each existing Board
in the frame. Push the Boards down evenly between the tops of all
Posts. If needed, tap snugly into place with a rubber mallet.
