Greencare DB1J 13, Руководство пользователя

Страница: 9 / 32

PREPARING THE WHEELCHAIR FOR USE
The range of wheel positions on the
Greencare frame system require brake
settings to suit wheelchair configuration.
Brakes are clamped in position on the frame.
Position of the clamp can be changed using a
hexagonal Allen key. The brake clamps
incorporate safety grips to maintain the set
position during use. Users should frequently
check that the brake is positioned effectively.
Brake adjustment may be carried out by a
competent person/carer if technical service
support is not available.
Lubrication of the brake mechanism, with a
none toxic lubricant will maintain effective
operation over a long period of use. Lubricant
on the operating face of the brake contact
shoe should be avoided.
Cable operated brakes with levers on the
pushing handle are an additional option to
allow attendant to slow down the chair without
having to reach for the brake handle. Holding
back the speed when going downhill is an
increasing benefit as the occupant weight
increases. It is a recommendation on 150Kg
and 175Kg occupant chairs.
Setting up Armrests and Supports
Armrests are latched at the front of the frame,
in socket locations, and pivoted at the rear of
the backrest location. They can be released at
the front and pivoted upwards and back for
transfer in and out of the chair. They are not be
removable from the chair unless specially
adapted for this purpose.
7
can be made detachable , which can help with
the compactness of the wheelchair and also in
side transfer (see page 11)
The armrest is removed by releasing the latch
and pivoting on the rear of the arm rest. When it
reaches a 30 degree angle the armrest will
release vertically and can be removed.
When not in use for transfer, armrests should be
fully located in the front socket at all times. An
armrest that is not fully located is prone to
accidental damage.
The front socket has a quarter turn feature that
releases the armrest. The armrest can be
swivelled back into the front socket, where it will
latch into position automatically.
The armrest should be secured in position at all
times. It is not recommended that the armrests
are grasped by the attendants to lift the chair
and occupant. Heavy lifting operations should
be avoided.
Thoracic supports are also available, these
positioning accessories are most often used to
improve occupant side stability and balance.
They can also ask as tactile reminders, to allow
the occupant maintain optimised posture.
If needed for a special purpose, the armrest