Instructions
STEP 1.
FITTING THE BATTERIES
STEP 2. CONNECTING
REMOTE WIREFREE
TRANSMITTER
Diagram 1.
MODEL NUMBER: DW070A
• No more wires
• Battery included for Transmitter
(2 x AAA)
• Transmitter fixing screws included
Please read the instructions fully
before attempting installation.
--
1) Transmitter
The battery compartment slot is
located on the bottom of the unit.
Using a flat screwdriver insert into
slot and gently push. The base cover
will pop open.
Insert the two AAA batteries
supplied and refit the base cover.
2.1 Connecting to an existing
bell push.
2.2 Connecting to a battery
powered doorchime and bell
push.
2.3 Connecting to an existing
doorchime and bell push
powered by mains
transformer.
2.1 Connecting to an existing bell
push.
You can keep your existing bell push,
or buy a new one and still have the
benefit of a portable doorchime.
Using bell wire, connect the
terminals on the wirefree
transmitter to those on the wired
door push as shown in diagram 2.
below.
A small rectangular ‘break-out’ is
provided in the transmitter base
through which bell wire can be fed
to the remote transmitter terminals.
Test the connection by pressing the
button on the front of the
transmitter and on the original bell
push. If all of your doorchimes sound
the wiring is correct.
Once the system is working, fix the
wirefree transmitter in a convenient
position in your home.
As this transmitter will be positioned
on a wall inside your home, it can be
fixed to the wall by either drilling
through the knockouts on the base
of the unit and screwing it in, or by
simply using a sticky back pad.
2.2 Connecting to a battery powered
doorchime and bell push.
Unclip the covers from both the
transmitter and your wired
doorchime. Ensure the batteries are
installed.
You will require a suitable length of
bell wire to connect the transmitter
to the wired doorchime (bear in
mind where you are to fit the
transmitter for use).
A small rectangular ‘break-out’ is
provided in the transmitter base
through which bell wire can be fed
to the remote transmitter terminals.
From the wirefree transmitter, using
the bell wire, connect bell wire as
shown in diagram 3. below to
terminals D and C on the wired
doorchime. Ensure correct
orientation of the terminals.
Fix the wirefree transmitter in a
convenient position in your home.
As this transmitter will be positioned
on a wall inside your home, it can be
fixed to the wall by either drilling
through the knockouts on the base
of the unit and screwing it in, or by
simply using a sticky back pad.
2.3 Connecting to an existing
doorchime and bell push,
powered by mains transformer.
Follow diagram 4. below to connect
the transmitter to an existing
doorchime and bell push, ensuring
the correct orientation of terminals.
A small rectangular ‘break-out’ is
provided in the transmitter base
through which bell wire can be fed
to the remote transmitter terminals.
Diagram 2.
Diagram 3.
Diagram 4.
WARNING: Electricity is
dangerous, if in any doubt
consult a qualified electrician.
