Page 20
SECTION D: MAINTENANCE AND REPAIR
BC 260 User’s Handbook
REVERSAL OR REPLACEMENT OF CHIPPER BLADES:
After having removed fixation screws of blades turn over unloading duct and running
the rotor manually acting by means of unloading mouth, bring the cipper blade close
to the plastic cover “C” (see the previous page). Using an aperture by means of the
hexagon spanner remove the fixation screws of blades previously liberating hollow
hexagonal from possible deposits of materials. Then, having the spanner inserted ,
settle it well with a slight blow of a hammer, after which unscrew strongly the bolts.
After having tightened till the end the screws run the rotor manually to verify that the
rotor does not interfere with blade and hammer. Restore the original safe guards.
CHIPPER BLADE
CAUTION
Before carrying out any type of maintanance operation turn off an engine
and take out the key from the board.
