7
SPRAYING APPLICATION
1)
After preheating, open the chemical
control valve by turning the knob
counterclockwise, repeat pushing and
releasing the pump handle to start
spray (misting or fogging).
Spray to the plant or object away from
about 1-2 meters.
*
When used as misting, open the
gas valve more if the particle
size is large, or close it a little if
the particle size is small.
*
When used as fogging, it is
difficult to check the discharged
particles with eyes, so please
check the level of liquid in the
chemical tank.
2)
The discharge volume of chemical can
be controlled by turning the chemical
control knob.
3)
The frequency of pumping action is 1
time in every 3-4 seconds.
If fire is sprayed out, stop pumping
immediately and close the gas valve.
Put the machine on an even place and
wait the fire stops.
*
for your safety, be care
of keeping away from the
discharged fog or mist. Do not
spray against the wind.
*
keep a distance from the shield
of the burner to avoid burning
your skin or clothes.
*
After ignition of the machine,
do not leave it aside without
operation.
*
If need refill of chemical or
water/diesel, stop the machine
and wait until it cools down.
