Green Energy GECI, Руководство пользователя

Страница: 4 / 15

GECI
™
BLACK DIAMOND CHARGER
PRELIMINARY PROGRAMMING
PRELIMINARY CONTROLS
Before to proceed with the programming sequence and before to connect a battery, make sure that the GECI
™
Black Diamond Charger has been installed by a qualified electrician, according with the instructions reported in
this manual. Before to use the charger, it’s necessary to control that the ventilation slots are not obstructed, and
that all the safety precautions reported in this manual are respected.
GECI
™
BLACK DIAMOND CHARGER PROGRAMMING
[V.140 – January 2011] IBCI BLACK DIAMOND
User's Manual
Page 7/28
4. PROGRAMMING
PRELIMINARY CONTROLS
Before to proceed with the programming sequence and before to connect a battery, make
sure that the Black Charger has been installed by a qualified electrician, according with the
instructions reported in this manual.
Before to use the charger, it's necessary to control that the ventilation slots are not
obstructed, and that all the safety precautions reported in this manual are respected.
GECI
™
BLACK DIAMOND CHARGER STARTUP SEQUENCE
Turn on the charger by moving the main switch to position “1”.
The charger will perform an automatic test of the control circuits, and will wait for a random delay on start.
The display will visualize the following messages.
1
2
3
>>>ATTENTION!<<<
Before to program the charger, disconnect the battery. This condition is necessary in order to activate the
User Programming Mode. Only expert users should modify the settings of the charger.
[V.140 – January 2011] IBCI BLACK DIAMOND
User's Manual
Page 8/28
STARTUP SEQUENCE
Turn on the charger by moving the main switch to position “1”.
The charger will perform an automatic test of the control circuits, and will wait for a random
delay on start.
The display will visualize the following messages.
IBCI BLACK
DIAMOND
SYSTEM CHECK
PLEASE WAIT ...
SYSTEM READY
xxx V – xxx A
SYSTEM READY
DATE TIME
USER PROGRAMMING MODE
ATTENTION!
Before to program the charger, disconnect the battery.
This condition is necessary in order to activate the User Programming Mode.
Only expert users should modify the settings of the charger.