Installation/ Operating Instruction for Weatherproof
Powercord Connection Box
Models: DB285B and DB330B
INSTRUCTIONS BEFORE USE
IMPORTANT
Dia.1
Dia.2
1. When connecting multiple appliances to a multi plug
within the box, make sure the total power drawn does
not exceed the maximum fuse rating of the
connection plug. (Seek advice if you are in doubt).
2. This box is designed for temporary electrical
connections only. Transformers are warm when in use,
sealing too many within this box can increase their
operating temperature.
3. Do not over fill the box, i.e. placing strain on the clamp
mechanism; this could break the water tight seal
created with the gasket.
4. Do not place more than one cable in each port to
avoid breaking the seal.
5. We advise any products used in the DRiBOX are CE
approved for outdoor use.
6. Use of a PowerBreaker RCD is recommended from the
main electric supply.
7. Do not bury this product, use on the surface only.
8. Install the cables and appliances per manufacturer’s
instructions.
9. Do not over bend or over stretch any wires within the
DRiBOX to avoid crimping, leading to possible
damage.
10. Do not submerge in water.
11. Do not stand in water while plugging electrical
devices in.
12. Do not touch sparking wires or connections.
13. Turn off main power switch before handling connections in
wet areas.
1. Make sure your box is complete with two handles (one
on either side of the box), main box and lid. See Dia.1
2. Before clamping the lid closed make sure the box is
totally dry inside to prevent moisture being trapped
inside.
3. To increase the sealing effect of this box we advise to
use the retaining lugs on the lid by clipping them under the
lip of the main box. See Dia.2
4. Make sure the box is left in a position where the lid is facing
upwards and the box cannot tip over.
DRiBox Ins Dec 18.qxp_Layout 1 13/12/2018 15:49 Page 1
