Gree Terra GWH09TB-D3DNA1A, Руководство по обслуживанию

Страница: 134 / 142

,QVWDOODWLRQDQG0DLQWHQDQFH
6HUYLFH0DQXDO
2 Buttons
2.1 Layout of Buttons
3 Operation Instructions
3.1 On/Off
Press On/Off to turn on the unit and turn it off by another press.
Note: The state shown in Fig.3.1.1 indicates the “Off” state of the unit after power on. The state shown in Fig.3.1.2 indicates the
“On” state of the unit after power on.
3.2 Mode Setting
Under ON state of the unit, press the Mode to switch the operation modes as the following sequence: Auto–Cooling–Dry–Fan–Heating.
2.2 Functions of Buttons
Fig.3.1.1 “Off” State Fig.3.1.2 “On” State
Table 2.1
No. Name Function
1 Enter/Cancel Function selection and cancellation.
2 ▲
Running temperature setting of the indoor unit, range:16~30
o
C(61~86°F).
Timer setting, range:0.5-24 hr.
6 ▼
3 Fan Setting of the high/middle/low/auto fan speed.
4 Mode Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.
5 Function Switchover among the functions of Turbo/Save/E-heater/Blow etc..
7 Timer Timer setting.
8 On/Off Turn on/off the indoor unit
4+2 ▲+Mode
Press them for 5s under off state of the unit to enter/cancel the Memory
function(If memory is set, indoor unit after power failure and then power
recovery will resume the original setting state. If not, the indoor unit is
defaulted to be off after power recovery. Memory off is default before
delivery.).
3+6 Fan+▼
By pressing them at the same time under off state of the unit, will be
displayed on the wired controller for the cooling only unit, while will be
displayed on the wired controller for the cooling and heating unit.
2+6 ▲+▼
Upon startup of the unit without malfunction or under off state of the
unit,press them at the same time for 5s to enter the lock state, in which
case,any other buttons won’t respond the press. Repress them for 5s to quit
this state.