Gree GRS-1.5/TD150ANbA-K, Руководство пользователя

Страница: 16 / 38

Air Source Heat Pump Water Heater
12
3.2 Basic Requirement on Installaion Location
The unit will go into faults when installed in the locations listed below. If
inevitable, please contact the GREE appointed service center for further service.
(1) Where there are intense heat sources, steam, inflammable or explosive
gas or volatile substances.
(2) Where there are high-frequency devices, like welding machines, medical
equipments, etc.
(3) Where the environmental PH is high, voltage fluctuation is high, located in
vehicle or ship.
(4) Where there is oil (mechanical oil) in air.
(5) Where there is sulphide gas.
(6) Other special environments.
4 Water Heater Installation
4.1 Selection for Water Heater Installation Location
(1) Suggest installing the unit indoors. But do not make the wind blowing to
the living room.
(2) The noise and air flow generated at the air outlet will not influence your
neighbors, animals and plants.
(3) Good ventilation is available.
(4) It is able to withstand the weight and vibration of the unit and it is available
for safe installation.
(5) It is dry but not subject to direct sunlight or strong wind.
(6) Don’t install it in places with electromagnetic interference.
(7) It agrees with the installation dimensions of the unit and is accessible for
inspection and maintenance.
(8) It is out of touch of the children.
(9) It will not affect the public passages and the city layout.
NOTES
：
①
As unit operation will generate cold air, certain noise will occur, do not install
it in places with frequent activity by the user. Any harmful effect due to
improper installation location, Gree shall not be liable.