Gree GRS-1.5/TD150ANbA-K, Руководство пользователя

Страница: 15 / 38

Air Source Heat Pump Water Heater
11
3 Installation Notice
3.1 Important Prompt
(1) It shall be installed by the skilled personnel in accordance with the
national wiring rules and instructions covered in this manual.
(2) Please contact the GREE appointed service center prior to installation,
otherwise, faults due to installation by the non-appointed service center
would be handled difficultly. For any air source heat pump water heaters
which are not installed by our franchised entrusted party, if malfunctions
occur or resulting in other problems, Gree shall not be liable.
(3) To install and remove air source heat pump water heater, please contact
local Gree authorized maintenance center. If the user use self-prepared
materials to install our air source heat pump water heater, all losses
resulted in pipeline leakage, falling off and improper installation, which
might affect normal operation and usage of air source heat pump water
heater, Gree shall not be liable.
(4) The heat pump can operate when the ambient temperature is above 0°C
，
the water heater can only be put indoors and must be installed at the
places where the ambient temperature is above 0°C. If the ambient air
temperature falls lower than 0°C, the condensate water drainage may be
freezing.
(5) The nozzle with the rated flow of 6~7L/min is preferred.
(6) If water supply is of high salinity or inferior quality, proper filtering or
depuration is necessary.
(7) The water quality for the air source water heater should comply with the
local sanitation standard for the domestic drinking water.