3
U
I
f the power cable becomes damaged, stop
using the unit and have it serviced by a
qualified service technician. Do not pull, bend,
To avoid dangerous electrical shock or
relocation or servicing must be
performed by a qualified service
technician.
Colder temperatures will cause a
decrease i
n the flow rate. This is
normal.
Do not store the unit in direct sunlight
or at less than 32 degrees Fahrenheit.
When the inlet water doesn't meet
the municipal tap water standard
(e.g. includes excessive sand or
mud or chlorine exceeds
standards), please install a
pretreatment device in front of this
product.
The recommended working pressure of
the unit is 14.5 - 58 psi. Please install a
pressure is above or below this range.
If the unit becomes damaged,
immediately shut off the power and
water supply, unplug the power cord and
contact a qualified service technician.
field could damage the unit or
result in fire.
Содержание ROG400
Страница 13: ...12 Water pipe installation diagram PE Tubing Adjustable wrench Tools needed for Installation Pliers ...
Страница 15: ...14 Installation Precautions ...
Страница 16: ...15 ...
Страница 17: ...16 Maintenance Precautions ...