GREAT PLAINS YP4425A, Руководство по эксплуатации, Страница: 49 / 170

YP4425A Table of Contents Index Operating Instructions 45
2018-07-30 Table of Contents Index 401-805M
Monitor Operation
Monitor operation is described in a separate manual
supplied with your YP4425A Planter.
Operations covered in that manual (and therefore not in
this manual) include:
•
hydraulic drive control
•
seed rate calibration
•
planting rate
•
fertilizer rate
•
setting rate limits and detecting out-of-limits
•
GPS integration
•
fan rpm
3-Section Electric Clutch Operation
A clutch enables or disables groups of row units. The
standard YP4425A Planter has three clutches in the
seed meter drive system.
The standard clutch system is strictly operator controlled.
Monitor control of sections requires the optional Swath
Command™ system (page 46).
The switches Left / Center / Right correspond to
the left wing, center section and right wing row units
respectively. The data in the table below is normally
preset at the factory for your planter configuration.
The Master switch controls all rows. For all switches,
“OFF” (down) removes power from the clutch,
disengaging that row set. When a switch (and Master) is
ON, the LED for that switch illuminates steadily.
3-Section Clutch Switch Coverage
Clutch Switch Coverage (Rows)
Left Center Right
16 row 01-05 06-11 12-16
24 row 01-08 09-18 19-24
31 row 01-10 11-21 22-31
32 row 01-10 11-22 23-32
48 row 01-15 16-33 34-48
Figure 48
Seed Monitor Console
29801
Figure 49
CFM: Clutch Switches
26120
1
2
3
4
2 3 4
1
2 3 4