GREAT PLAINS Yield-Pro PL5800, Руководство оператора

Страница: 55 / 111

Great Plains | 411-474M | 12/17/2019 48
PL5800 Planter Table of Contents Index Operation
The row cleaners need to be adjusted for conditions,
crop changes, and as coulters and openers wear.
Ideally cleaners contact only the trash, and do not
disturb the soil. If allowed to dig, row cleaners can
reduce seed coverage.
The suggested initial depth is tine tips should be at
ground level.
Make the adjustment with the planter raised.
Sharp Object Hazard
Row cleaner tines, casting edges, and
coulter blades are sharp and may result in
injury. Wear hand protection when working
in this area.
To adjust the row cleaner:
1. Determine the height adjustment required.
Measure from the lowest tine to the ground.
2. Support most or all of the weight of the arm to aid
in the ease of the adjustment.
3. Adjust the arm:

Unit-Mount Row Cleaner:
a. Remove the bent pin (1).
b. Support the arm at the desired height.
c. Slide the adjustment tube (2) until the cross-tube
(3) contact the arm at the target height.
d. Insert the bent pin (1) in whichever hole pair is
most aligned with desired height.

Unit-Mount Coulter Row Cleaner:
a. Loosen the bolts (4).
b. Slide the down-stop (5) on the arm (6) back
toward the pivot for the shallower cleaning, or
forward towards the tines for deeper cleaning.
c. Tighten the bolts. Each possible hole pairing
adjusts the tine height by about 3/4 inch (19 mm).
Check bolt tightness before each planting
session to avoid down-stop slippage.
d. Check the new height measurement.

Unit Mounted Coulters
The best operating depth for coulters is 1/4 inch (6
mm) above the opener depth. The coulters may have
originally been set to this depth, but coulter and
opener blades wear with time, and may need
adjusting.
Crushing Hazard
Make sure machine is secure before
working on the machine. A falling machine
can cause severe injury or death.
Sharp Objects Hazard
Row cleaner tines, casting edges, and
coulter blades are sharp and may result in
injury. Wear hand protection when working
in the area.
Adjust the coulter depth by mounting the coulter
blade in one of the six mounting holes on the coulter
bracket.
1. Raise the planter.
Row units may be fully lowered or locked
up. Do not attempt to move the blade when
!
1
3
2
27308
4
5
6
27343
i
!
!
29125A
1
2
4
3
6
5
i