GREAT PLAINS Yield-Pro PL5800, Руководство оператора

Страница: 44 / 111

PL5800 Planter Table of Contents Index Operation
Great Plains | 411-474M | 12/17/2019 37
depending on the desired position or clearance
between other attachments. Testing has shown
better performance behind the hub, but available
space may dictate the mounting position.
The top illustration shows the Terra-Tine in front of
the hub. The bottom illustration shows the Terra-Tine
behind the hub.
Frame Mounted Coulters
Adjust the coulter depth at the shaft (1) for a running
depth (2) of 4 to 4 1/2 inches (10.2 to 11.4 cm) below
ground level of off row. If on row, as a no-till coulter,
operate at planting depth only (3). Refer to the
Vantage I manual (207-376M) for more adjustments.
The spring (4) is factory pre-set. Do not adjust the
spring tension.
Vantage I Application
Adjust the tine height at the back plate (1) for a
running depth (2) of 1 inch (2.5 cm) below ground
level (3). Refer to the Vantage I manual (204-376M)
for further adjustments.

5000 Series Row Unit
(1) Lock-up Pin Storage Hole (standard). See
“ Row Shut-Off ” on page 46.
(2) Row Unit Lock-up Hole (standard). Pins are
standard on some models. With the row unit
raised above level, the lock-up pin is inserted
here. See “ Row Shut-Off ” on page 46.
(3) Down-pressure Cam (standard). Row units
are mounted on parallel arms; allowing the row
unit to move up and down while staying
horizontal. Springs set by a cam add an
adjustable force to the row weight. See “ Row
Unit Down Pressure ” on page 38.
(4) Pressurization Air Inlet (standard).
Pressure-regulated air enters the meter here and
2
1
13469
2
25392
1
2
3
4
22951
1
3
2
68907
10 11 12
15
14
16
1
3
2
4
5
6
7
8
9
13