manualshive.com logo in svg

GREAT PLAINS TSF1080, Руководство оператора, Страница: 10 / 94

Поделиться
Скачать
GREAT PLAINS TSF1080 Скачать руководство пользователя страница 10

08/01/2018

Table of Contents

Index

500-641M

TSF1080, TSF1090, TSF1280 & TSF1290

Table of Contents

Index

Important Safety Information

6

Practice Safe Maintenance

Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.

Work in a clean, dry area.

Fold the Front Fold Boom Sprayer, put tractor in park,
turn off engine, and remove key before performing
maintenance.

Make sure all moving parts have stopped and all system
pressure is relieved.

Allow Front Fold Boom Sprayer to cool completely.

Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on Front
Fold Boom Sprayer.

Inspect all parts. Make sure parts are in good condition
and installed properly.

Remove buildup of grease, oil or debris.

Remove all tools and unused parts from Front Fold Boom
Sprayer before operation.

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.

Tire Safety

Tire changing can be dangerous and should be performed
by trained personnel using correct tools and equipment.

When inflating tires, use a clip-on chuck and extension
hose long enough for you to stand to one side–not in front
of or over tire assembly. Use a safety cage if available.

When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.

Содержание TSF1080































































































Отзывы:

Нет отзывов