GREAT PLAINS Terra Max HT1110-6.0M Скачать руководство пользователя страница 35

Страница: 35 / 42

HT1110-6.0M & 7.5M

Table of Contents

Maintenance and Lubrication

Great Plains

| 588-206M | 3/21/22

Table of Contents

Troubleshooting

Problem

Solutions

Machine will not unfold: (Green Hand-

grips)

Make sure hoses are connected properly to the tractor’s remote.

Make sure the wing lock levers are unlocked.

Make sure the hydraulic lock valve is open for field operation, close down pressure valve

completely for full pressure.

*If closing the down pressure valve allows to unfold be sure to open for field use.

Switch fold hoses to another remote on tractor.

Trace hydraulic plumbing to confirm proper routing

Replace hydraulic tips on fold hoses.

Machine will not fold

Make sure hoses are connected properly to the tractor’s remote.

Make sure the hydraulic lock valve is open for field operation.

Switch fold hoses to another remote on tractor.

Trace hydraulic plumbing to confirm proper routing.

Replace hydraulic tips on fold hoses.

Machine will not lower: (Black Hand-

grips)

Make sure both transport locks are removed.

Make sure hoses are connected properly to the tractor’s remote.

Make sure the hydraulic depth stop valve is in operating condition, and not damaged.

Switch lift hoses to another remote on tractor.

Trace hydraulic plumbing to confirm proper routing.

Replace hydraulic tips on lift hoses.

Machine will not lift

Make sure hoses are connected properly to the tractor’s remote.

Make sure the hydraulic depth stop valve is in operating condition, and not damaged.

Switch lift hoses to another remote on tractor.

Trace hydraulic plumbing to confirm proper routing.

Replace hydraulic tips on lift hoses.

Machine will not lift evenly: (Black

Hand grips)

Call your GP representative for cylinder diagnostics.

Call your GP representative.

Содержание Terra Max HT1110-6.0M











































Результаты поиска

Содержание Terra Max HT1110-6.0M

Отзывы:

Бренды по названию

Популярные бренды

GREAT PLAINS Terra Max HT1110-6.0M, Руководство оператора

Результаты поиска

Содержание Terra Max HT1110-6.0M

Отзывы:

Бренды по названию

Популярные бренды