manualshive.com logo in svg

GREAT PLAINS TCN5107, Руководство оператора, Страница: 15 / 78

Поделиться
Скачать
GREAT PLAINS TCN5107 Скачать руководство пользователя страница 15

TCN5107-5313

Table of Contents

Index

Important Safety Information

Great Plains

 | 566-170M | 04/26/2019

Table of Contents

Index

9

It is the Owner’s Responsibility to Ensure;

The Operator is trained and competent to use the machine
and tractor.

The tractor is suitable for the machine.

Adequate Risk and COSHH assessments have been

undertaken regarding the machine’s use, Specifically,

these include issues concerning contact with the soil, crop
residues, chemicals, lubricants and other compounds

during operation, maintenance, and rhe possibility of

stones being ejected at high speed during work.

Beware of trapping hazards when manipulating the parking
jacks, shut-off valves, wheel chocks, or other moving parts.

Ensure any heavy components are fully supported when

removing pins/bolts. 

Safety Decals

Safety Reflectors and Decals

Your  implement  comes  equipped  with  all  lights,  safety
reflectors and decals in place. They were designed to help you

safely operate your implement. 

Read and follow decal directions.

Keep lights in operating condition.

Keep all safety decals clean and legible.

Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.

When ordering new parts or components, also request
corresponding safety decals. 

To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel  backing  from  decal.  Press  firmly  on  surface,  being

careful not to cause air bubbles under decal.

Содержание TCN5107















































































Отзывы:

Нет отзывов