GREAT PLAINS PL5500, Руководство оператора, Страница: 30 / 109

PL5500 Planter Table of Contents Index Operation
Great Plains | 411-633M | 2021/10/21 23
appearance, as shown. This will indicate the fold
hydraulics are inactive.
Folding Wings with IRC
1. Move the planter to level ground with adequate
overhead and side-to-side clearances for
unfolding/folding.
2. Place the tractor in park and/or set the park
brake.
3. Make sure markers, if installed, are fully folded.
4. Fully raise the planter. See “ Raising Planter
with IRC ” on page 19.
5. Set the tractor circuit lift lever to neutral.
While using the console, you may tap the
HOME icon from almost any screen to
return to the MAIN SCREEN.
6. On the console, on the MAIN SCREEN, tap the
FOLD SEQUENCE icon.
7. On the console, on the FOLD SEQUENCE
screen, tap
FOLD
icon.
8.
After tapping the
FOLD
icon, the icon will change
to a blue color, and it will change slightly in
appearance, as shown. This will indicate the fold
hydraulics are active, and are ready to be
engaged.
9. Set the tractor circuit lift lever to neutral.
10. Install cylinder locks on the fully raised lift
cylinder rods on both of the main transport
wheels and secure with pins
.
11. With the blue soft key indicating active fold
hydraulics on the console, retract the tractor
circuit lift lever to fully raise the outer wing gauge
wheels.
12. Retract the tractor circuit fold lever until the fold
cylinders (3) are fully retracted to bring the left
i