GREAT PLAINS 7323DH, Руководство по предпродажной подготовке

Страница: 20 / 70

2021-06-10 Table of Contents Index 556-235Q
Series II Disk Harrow Table of Contents Index Assembly 16
Light Brackets and SMV Assembly
Refer to Figure 15
43. Install the amber light bracket assemblies to rear
gang bars with the u-bolts provided with brackets.
Position the amber light brackets between the
gang bar mounting plate and the c-shank mounting
plate. The placement may need small adjustments to
avoid the tires during field operation and the wings
while folding and unfolding.
44. Attach red lights and the SMV sign on the wing
stops with the bolts, lock washers and the nuts
provide in the locations shown.
45. Connect the wiring harness leads marked right and
left, red and amber to the appropriate side of the
machine for turn signals to be correct. For the amber
lights, thread the wires through the light bracket
tubing before connecting to the lights. For the red
lights run wires long sides of the wing stops and
secure with zip ties.
46. Tighten all bolts to specs, See “ Torque Values
Chart ” on page 19.
1
1
2 3
1
2
3
1
Figure 15
Narrow Center Lights
43462