GREAT PLAINS 3S-3000-3210 Скачать руководство пользователя

Страница: 6 / 118

2018-06-18

Table of Contents

Index

195-441M

3S-3000/F/HD/HDF

Table of Contents

Index

Important Safety Information

Avoid High Pressure Fluids

Escaping fluid under pressure can penetrate the skin,
causing serious injury.



Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.



Use a piece of paper or cardboard, NOT BODY PARTS, to
check for suspected leaks.



Wear protective gloves and safety glasses or goggles when
working with hydraulic systems.



If an accident occurs, seek immediate medical attention
from a physician familiar with this type of injury.

Use A Safety Chain



Use a safety chain to help control drawn machinery
should it separate from tractor drawbar.



Use a chain with a strength rating equal to or greater than
the gross weight of towed machinery.



Attach chain to tractor drawbar support or other specified
anchor location. Allow only enough slack in chain to
permit turning.



Replace chain if any links or end fittings are broken,
stretched or damaged.



Do not use safety chain for towing.

Keep Riders Off Machinery

Riders obstruct the operator’s view. Riders could be
struck by foreign objects or thrown from the machine.



Never allow children to operate equipment.



Keep all bystanders away from machine when
folding/unfolding, raising/lowering markers,
raising/lowering openers, and transporting.

Use Safety Lights and Devices

Slow-moving tractors and towed implements can create
a hazard when driven on public roads. They are difficult
to see, especially at night.



Use flashing warning lights and turn signals whenever
driving on public roads.



Use lights and devices provided with the drill.

Содержание 3S-3000-3210























































































































Результаты поиска

Содержание 3S-3000-3210

Отзывы:

Похожие инструкции для 3S-3000-3210

Бренды по названию

Популярные бренды

GREAT PLAINS 3S-3000-3210, Руководство оператора

Результаты поиска

Содержание 3S-3000-3210

Отзывы:

Похожие инструкции для 3S-3000-3210

Бренды по названию

Популярные бренды