manualshive.com logo in svg

GREAT PLAINS 1205NT, Руководство оператора, Страница: 18 / 64

Поделиться
Скачать
GREAT PLAINS 1205NT Скачать руководство пользователя страница 18

1205NT

Table of Contents

Index

Preparation and Setup

14

3/7/19

Table of Contents

Index

150-131M

Hitch Height Adjustment

1. For proper field operation, drill tongue should run 

level in field position. See Figure 4.
a. With drill in field position, adjust tongue hack to 

level tongue

.

b. Measure tractor drawbar height to determine 

proper hitch height on drill.

c. Attach hitch to tongue with two 3/4 x 6-inch 

bolts (1), lock washers (2) and nuts (3).

Note: Mounting holes in drill hitch are offset so hitch can 

be turned over and attached in three different 

positions, giving six different hitch heights.

Note: When hitching drill to a different tractor, check for 

a difference in drawbar heights. If heights are 

different, readjust accordingly.

Hitching to Tractor

Refer to Figure 5.

1. Back tractor to drill. Using the screw jack, adjust 

drill tongue to get drawbar under upper hitch plate 

(1).

2. Align rear hole in upper hitch plate with large hole 

in drawbar. Place lower hitch plate (4) under 

drawbar and attach to upper hitch plate with two 5/8 

x 4 inch bolts (5), flat washers (6) and Nylock nuts 

(7).

3. Bolt top upper hitch plate through hole in drawbar 

to lower hitch plate with 1 x 5 1/2 inch bolt (8), USS 

flat washer (3) and Nylock nut (2).

4. Securely attach safety chain to drill hitch with a 3/4 

x 2 1/4 inch bolt (10), safety washer (11), lock 

washer (12) and nut (13). Then attach chain to 

tractor drawbar.

5. Store jack on top of tongue as shown in Figure 6.

13940

Figure 4

Hitch Height

13944

Figure 5

Hitching to Tractor

13945

Figure 6

Jack Storage Position

Содержание 1205NT

































































Отзывы:

Нет отзывов