manualshive.com logo in svg

GREAT PLAINS 1007NT, Руководство оператора, Страница: 14 / 86

Поделиться
Скачать
GREAT PLAINS 1007NT Скачать руководство пользователя страница 14

10

1007NT

Great Plains Manufacturing, Inc.

150-290M

03/18/2019

818-587C

Caution: General Instructions

front face, top front tool bar, near center;

one total

818-719C

Caution: General Instructions

front face, top front tool bar, near center;

one total

838-092C

Caution: Tire Inflation

for 265/70B16.5 Skid Steer tires only

outside face of each wheel tire rim;

four total

End of Decals

28457

WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Read Owner’s Manual before using machine.

Stand clear when folding and unfolding markers.

Stand clear when raising and lowering machine.
Keep all safety shields and devices in place.

Keep hands, feet, and clothing away from

Never ride on machine.

Always lower or properly support machine

Escaping hydraulic fluid can cause serious

Review safety instructions with all operators

moving chains and sprockets.

BEFORE servicing.

818-587C Rev. B

injury.

annually.

CAUTION

28457

WARNING:

Cancer and Reproductive Harm - www.P65Warnings.ca.gov

To prevent injury or death:

Read and understand Operator’s Manual before using.

Lower implement, stop tractor engine, set park brake and remove ignition

Do now allow riders.
Keep others away during operation.
Safely support and secure implement before repairs are made.

key before servicing, adjusting, repairing or unplugging.

CAUTION

818-719C

28457

Содержание 1007NT























































































Отзывы:

Нет отзывов