Grease Guardian GGX15/110VAC, Установка, эксплуатация и обслуживание

Страница: 18 / 29

18
Next remove wiper blade by lifting front
of blade and moving it back along the
curved slots as shown above. Wipe and/or rinse any debris from wiper
blade component. Replace blade by
sliding it back into the tank
After replacing blade, replace oil contain-
er onto the bracket notches
At end of day fill a sink with warm water and
release to flush through Grease Guardian,
to remove silt and prevent odors.
Quarterly Pump Out Requirement (every 3 months)
The Home Screen displays the days remaining to the pump out due, from “14” days due.
Failure to ensure timely pump out/vacuum may impair performance and cause odor/odour issues.
Pump outs ensure long-term performance and
comply with our warranty terms. Pump outs must
be carried out by a licenced catering waste collec-
tor. After first disconnecting the Grease Guardian
mains plug, tasks should include the following:
Essential:
◼ Tank pump out - all waste and liquid contents
◼ Wipe clean of any debris from heater element.
Also recommended, via service partner agreement:
◼ Electrical checks
◼ Replace rubbers seals/gaskets
◼ Staff retraining and timer optimisation
◼ Resetting of service reminder