49
M_LS900 Fibre - LS900 Edge_EN_C
Preventive maintenance
3.
Cleaning the system
Engraving table
1.
Switch off the machine. Unplug the machine.
2. Open the front door.
3. Remove any dust or debris inside the machine using a vacuum cleaner.
Do not use a blower.
4. Clean the surface of the engraving table with a soap solution, alcohol or acetone and paper towels.
Never pour or spray solution into the machine.
Dampen the paper towel or cloth with the cleaning solution away from the machine. Wipe the parts.
5. Clean the glass with a chamois cloth and a soap solution. Do not use paper towels. Do not use
solvent.
6. Use a soft cloth or paper towels and a soap solution to clean the casing. Do not use alcohol,
acetone or any other aggressive product because it could damage the paint.
Guides/belts
No user maintenance is necessary.
Fume extraction outlets
Clean with a vacuum cleaner and, if necessary, a brush.
