42
M_LS900 Fibre - LS900 Edge_EN_C
L. Using the machine
Example: engraving a keyring
1. Switching on the PC / Switching on the machine
1. Switch on the PC.
2. Wait until start-up is complete.
3. Switch on the machine.
2. Creating the composition
1.
Adjust the page size to the maximum size of the engraving area in the graphics software (LS900
Fibre / LS900 Edge: 610 x 610 mm).
2.
Enter the text to be marked. It should have a black fill and no contour.
Example: Enter "ABCDE".
3. Position the text in the top left corner of the page, depending on the position of the keyring on the
engraving table.
Screen (PC)
3.
Setting the driver properties
Refer to the manual (L-Solution driver).
Choice of laser source (only for LS900 Edge machines)
The LS900 Edge machine has 2 laser source(s): fiber, CO
2
.
In order to determine which laser source is used, it is necessary to configure the colors associated with the
elements of the composition in the software or the driver. Refer to the manual (program Laserstyle, L-Solution
driver).
ABCDE
