Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [email protected] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Convert any mic stand into a music stand
Die-cast plate locking mechanism
Lightweight construction
INTRODUCTION
This simple but smart adaptation of a music stand desk allows you to convert any
microphone stand into a music stand. This music desk is equipped with a 3/8” female
thread and can be attached to any product with a male counterpart thread. The
desk can thus also be attached to various kinds of mic holders such as table-top or
conventional stands – opening a whole new world of options.
SPECIFICATIONS
Product type:
Stands and Tripods
Type:
Music stand
Music desk type:
perforated music desk
Support material:
steel
Support surface:
powder coated
Support colour:
black
Support width:
340 mm
Support height:
475 mm
Weight:
1.8 kg
GNSMS01
Music stand desk for microphone stands